AUXILIARY CONTACT, MOUNTING: SIDE BY SPRING EATON MOELLER NHI SERIES
NHI auxiliary contacts with MOELLER click coupling in different versions, with 1 or 2 poles
REFERENCE MOELLER | Tensile strength | Intensity of use of auxiliary contacts with AC-15 | Contacts | Configuration |
NHI11-PKZ0 | 6 kV | 6 A | 2 | 1 NA / 1 NC |
NHI11 | 4 kV | 5 A | 2 | 1 NA / 1 NC |
NHI10 | 6 kV | 6 A | 1 | 1 NA |
To fit on the front or right of MPCB - PKZM0
Standard versions work when the unit is "ON" or "OFF"
Versions indicating disconnection identify overload and short-circuit conditions
With nominal contact current of 5A AC and 1A in DC and a nominal voltage of 600V AC and 250V DC
A contactor is an electrically controlled switch to turn on a circuit of electric current, similar to a relai except with higher current levels apart from some other differences.
Relais are used when it is necessary to control a circuit by a differentiated high-intensity signal, or when several circuits have to be controlled by a single signal. The type of relai capable of withstanding this high intensity to directly control an electric motor and other loads, is a contactor.
Applications: Industrial