Stumble Feature K | Acc. to IEC 60898-1 400 V AC Acc. to IEC 60898-1 400 V Acc. to IEC 60947-2 440 V AC |
Nominal Operating Voltage | Maximum (Incl. Tolerance) 125 V DC Maximum (Incl. Tolerance) 440 V AC |
Nominal Insulation Operating Voltage (Ui) | 4 kv at 2000 m 5 kv at Sea Level 6.2 kv |
Nominal Pulsed Voltage (Uimp) | Test voltage 50/60 Hz, 1 min: 2 kv |
AC/DC Input Voltage Type | |
Rated Current (In) | 4 A (AC) 6 kA (DC) 6 kA (400 V AC) 6 kA (400 V) 6 kA |
Rated Short Circuit Capability | (125 V DC) 10 kA (230 V AC) 20 kA (400 V AC) 10 kA (440 V AC) 10 kA (48 V DC) 20 kA (230 V) 20 kA (400 V) 10 kA |
Nominal Short Circuit Cut-Off Capacity (Icu) | (230 V) 20 kA (400 V) 20 kA |
Conditional Short Circuit Rated Current (Inc) | (230 V AC) 15 kA (400 V AC) 7.5 kA (440 V AC) 7.5 kA |
Nominal In-Service Short Circuit Cut-Off Capacity (Ics) | |
Frequency (f) | 50 Hz 50 / 60 Hz 50 ... 60 Hz |
Nominal Frequency (f) | |
P loss of power | 3.4 W at Rated Operating Conditions per Pole 1.7 W |
Connecting the Power Supply | Arbitrary |
Contact position indication | Red ON / Green OFF |
Power Limitation Class | 3 |
Electrical Resistance | 20000 AC cycle |
Mechanical resistance | 20000 cycle |
Number of posts protected | 2 |
Number of poles | 2 |
Surge Category | III |
Tightening torque | 2.8 N·m |
Mounting Type | DIN-Rail |
Screw Terminal Type | Failsafe Bi-directional Cylinder-lift Terminal |
Actuator Marking | I/O |
Actuator Material | Insulation Group II, Black, Sealable |
Housing Material | Insulation Group II, RAL 7035 |
Contactor mounting | Mounting position any |
Recommended screwdriver | Pozidriv 2 |
Available Accessories | Yes |
Busbar | 10 / 10 mm² |
Connection Capacity | Installation size acc. to DIN 43880 1 |
Cable stripping length | 12.5 mm |
Terminal Type | Screw Terminals |