NON-AQUEOUS WET REVEALER FOR THE PROCESS OF PENETRATING LIQUIDS. 400 ml
Product information ARDROX 9 D1B
ARDROX 9 D1B is a liquid product based on a dispersion of white powder into a mixture of volatile and non-aromatic or halogenated solvents.
Technical information about ARDROX 9 D1B
Appearance: White dust suspension
Specific weight: 0.8 to 0.9 gr/cm3
Flash point: -17oC
Corrosion: complies with MIL-I-25135 and AMS 2644
ARDROX 9 D1B meets the following specifications:
- AMS 2644
- ASME Code Section V
ARDROX 9 D1B is included in the QPL-AMS 2644 form D type 1.
Applications of ARDROX 9 D1B
ARDROX 9 D1B is the solvent-based developer used in the penetrating liquid inspection process.
It is used in aerosol. Three or four passes will be applied until a continuous white layer is obtained.
9 D1B ARDROX Guide
Before operating according to the process described it is important to read and understand this document and the product safety data sheet.
Personal and environmental protection
All local, regional and national provisions on the transport, storage, use and treatment of concentrated or diluted waste and its working solutions should be observed.
Product-specific information can be found on the Safety Data Sheet. The user must pay strict attention to the information and hazard symbols of the product label.