FRONIUS TRANSPOCKET 150 WELDER 4,075,210 / 4,075,212,850
WELDING MACHINE MMA-TIG TRANSPOCKET 150 /EF 4075210 FRONIUS
Our new range of MMA and Tig welding equipment, TransPocket 150 from FRONIUS offers a high degree of flexibility.
They have integrated PFC (Power Factor Correction) technology that allows the use of electrical network cables up to 100 meters in length without losing hardly any welding power, and facilitates the handling making it more intuitive.
With its 7-segment display it allows you to configure the configuration parameters very quickly, as well as consult them, the screen is placed somewhat inclined, so that it is easier to see when performing welding work and is not easily damaged.
The configuration is easy to perform with simple parameters to understand and simplifying the work.
The TransPocket welding equipment of FRONIUS, is a professional equipment, but it has functions that make even the person with minimal notions in welding can make some cords of authentic professional.
The TransPocket 150 welding machine from FRONIUS, is available in 3 versions:
• only the machine without clamp or mass (ref. FRONIUS 4,075,210 M - ref. ENDEVOR 4075210M)
• Machine version MMA or Electrode, with mass and clamp (ref. FRONIUS 4,075,210 - ref. ENDEVOR 4075210A)
• TIG version machine, with mass and torch (ref. FRONIUS 4,075,212,850 - ref. ENDEVOR 4075212850) This option is a set that comes with: Ground cable 16mm2 3m, electrode holder 16mm2 4 meters, welding screen EASY, hammer slag, brush, TIG welding gloves, Torch Tig TTG1600A FS / UD 4 meters (all in tool box -Tool case 60)
PRODUCT DETAILS
TECHNICAL DATA OF TransPocket 150 Welder:
Long | 365 mm. |
---|---|
High | 285 mm. |
Wide | 130 mm. |
Weight | 6.5 kg. |
Welding Current / Duty Cycle [10min/40°C] | 180A / 40% |
Welding Current / Duty Cycle [10min/40°C] | 160A / 60% |
Welding Current / Duty Cycle [10min/40°C] | 120A / 100% |
Open circuit voltage | 101 V |
Main voltage | 230V |
Type of protection | IP23 |
FUNCTIONS TransPocket 150 welding machine:
• SOFTSTART
SoftStart function. This function is what ensures that we have a stable arc when starting the welding bead, it is especially indicated for those electrodes that are welded with a low power current, such as the basic electrodes.
• ANTI-STICK
Anti-Stick function. The power source turns off automatically, if a short circuit occurs that causes the electrode to stick together during the welding process. Thus preventing the electrode from burning.
• HOTSTART
HotStart function. This function helps to turn on the electrode, for a fraction of a second, the power of the current is increased at the time of ignition. It is specially designed for welding with rutile and cellulosic electrodes.
•TAC
TAC function. This function allows us to make only one point for stapling, with the pulsed voltaic arc we get the two moving fusion baths, jump together in a short time to form a single bath. Fantastic function for welding thin sheets in which we do not want filler material.
• TIG COMFORT STOP
TIG Comfort Stop function. When we finish the welding bead, when there is a relevant change in the length of the voltaic arc, the power current is automatically turned off. This prevents the arc from being dilated when the TIG torch is removed from the workpiece to finish the welding process. The result is a better weld finish in the final crater area while maintaining gas protection.
REFERENCE FRONIUS | REFERENCE ENDEVOR | CONTENT |
4,075,210 | 4075210ACC | WELDING MACHINE + GROUND WIRE + ELECTRODE CABLE |
4,075,210 | 4075210M | WELDING MACHINE ALONE |
4,075,210 | 4075210-RA | WELDING MACHINE ONLY NEW, RECONDITIONED BY FRONIUS |