ADAPTER KQ2H04-06A; KQ2H06-08A; KQ2H08-10A; KQ2H10-12A SMC
ADAPTER KQ2H04-06A; KQ2H06-08A; KQ2H08-10A; KQ2H10-12A SMC
REFERENCE SMC | Tube Connection A | Tube Connection B |
KQ2H04-06A | 4mm | 6mm |
KQ2H06-08A | 6mm | 8mm |
KQ2H08-10A | 8mm | 10mm |
KQ2h20-12A | 10mm | 12mm |
KQ2 one-touch uneven straight joints are used to connect nylon and polyurethane pipes of different sizes. The special profile design of these adapters provides a positive seal under pressure without reducing flow. When the connector is removed from the tube, the bracket and collar are released, preventing too deep notches from being made in the tube.
Tube-to-tube fitting
Special joint profile design provides positive sealing under pressure without reduced flow
Release button allows easy removal of the tube without damage
Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100 kPa
Test pressure 3 MPA
Room and liquid temperature -5 to +60 °C (water 0 - 40 °C)
Note
Models with a suffix -X2 in the manufacturer's part number do not carry copper (plated in non-electrolytic nickel).
Tube-to-tube fittings
Insulation-coated threads minimize assembly time. The fittings can be used on positive pressure or vacuum lines. Suitable for use with nylon, soft nylon or polyurethane tubes for compressed air or water applications (general industry).
Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100 kPa
Test pressure 3 MPA
Room and liquid temperature -5 to +60 °C (water 0 - 40 °C)
Manufacturer Series | KQ2 |
Body Material | PBT |
Minimum Operating Temperature | -5°C |
Tube Connection A - Type | Snap-in |
Tube Connection B - Tube Size | 12mm |
Maximum Operating Temperature | +60°C |
Connection type | Tube by tube |