FAN WITH SCHNEIDER FILTER NSYCVF300M230PF

NSYCVF300M230PF SCHNEIDER FILTER FAN

NSYCVF300M230PF SCHNEIDER FILTER FAN

Fan with SCHNEIDER ELECTRIC filter

The forced ventilation fan SCHNEIDER ELECTRIC ClimaSys has a filtered air flow of 300m³ 230VAC/h and nominal supply voltage with . It is ideal for installations where the ambient temperature is lower than the desired temperature inside the housing. It requires a high level of protection. The surrounding environment is relatively clean, allowing air to enter the casing. It is an efficient thermal management system that extends the life of your equipment. The outside temperature must not exceed 35 °C and must be more than 5 °C below the required temperature in the housing. It has a face height of 170mm, a face width of 150mm and an installation depth of 62mm.
The kit includes:
1 front exit grille
1 axial motor
2 protective grille on the front and rear surfaces
1 front axial motor filter
1 snipping template
1 power cord

Features & Benefits

Consider pressure loss p caused by the outlet element (filter grille, vent or single opening) when determining fan flow
The storage temperature ranges from -40 °C to 70 °C.
Noise level ranges from 46dB to 49dB
Faston connector termination type