MECANOCAUCHO 129110 SUPPORT DIABOLO MALE 60X36 M10 100KG
MECANOCAUCHO 129110 SUPPORT DIABOLO MALE 60X36 M10 100KG
The Cylindrical Supports Mecanocaucho®, are devices to make fastenings or elastic fixings. It lends itself to the most varied uses especially for elastic suspensions and anti-vibration insulation of machines and various mechanical organs. They consist of a rubber block with two parallel metal reinforcements at the ends that allow their fixation either by screws in the "Female" model or with nuts in the "Male" model or a combination of both in the "Mixed" model. The rubber block can be cylindrical in cases where greater load capacity is required or in the form of a diabolo when greater elasticity is required in all directions.
Its elasticity is much greater in all directions parallel to the armatures than in the perpendicular direction. The rubber works with compression or shear depending on the direction in which it is placed in its assembly. This sense is made according to the use and the purpose pursued. Therefore, its assembly is done well with nuts or bolts according to the chosen model, holding one part to the fixed chassis and the other part to the machine to be suspended.
Depending on the size of the rubber block, the Cylindrical Supports AMC MECANOCAUCHO® has a greater or lesser elasticity, this being greater especially in the directions perpendicular to its axis (shear). The Cylindrical Supports element AMC MECANOCAUCHO® thus possible to make joints that allow important relative displacements, up to several millimeters (case of thermal expansions, chassis deformations, etc.). The Cylindrical Supports element AMC MECANOCAUCHO® lends itself very well to the vibratory isolation of machines where the vibrations are perpendicular to its axis, unless these efforts are too important applied in this sense. ADVANTAGES • Simplicity of assembly. • Great elasticity (especially transverse). •Economy.
APPLICATIONS
The Cylindrical Supports AMC MECANOCAUCHO® are advantageously mounted on small groups motor-pumps, motor-fans, dryers, screens, compactors, washing machines, electric motors, on-board boards, measuring devices, control cabinets, microphones, fluorescent tubes, etc.